2,200-4,400 lbs Bear Claw Excavator Forestry Grab - BC85
The Bear Claw forestry grabs are engineered specifically for the American market, featuring heavy duty HB450 reinforced legs, internal guide bars, high pressure cylinders, line bored pivot areas, bushes and hardened greaseable pins throughout.
These are supplied in either a non-rotating / fixed configuration which simply operates off the excavators double acting hydraulic hammer circuit, or alternatively with a full 360 degree rigid rotation unit (twin auxiliary services required on the excavator).
Non-rotating / fixed configurations are supplied with a quick hitch cross link headstock (if pin measurements allow) and enables the grab to be used in either orientation. Should the excavator pin measurements not provide sufficient clearance for a cross link headstock to be manufactured, a standard one way hitch will be provided - this can still easily be turned 90 degrees on a set of only 4 bolts in under 2 minutes. Rotating models are supplied with a standard 2 pin head stock. Please note that hydraulic hoses are not included as standard with this grab.
Fixed Configuration
The fixed configuration simply operates off the excavators double acting hydraulic hammer circuit. Fixed configurations are supplied with a quick hitch cross link headstock (if pin measurements allow) and enables the grab to be used in either orientation. Should the excavator pin measurements not provide sufficient clearance for a cross link headstock to be manufactured, a standard one way hitch will be provided - this can still easily be turned 90 degrees on a set of only 4 bolts in under 2 minutes. Rotating models are supplied with a standard 2 pin head stock. Please note that hydraulic hoses are not included as standard with this grab.
360 Hydraulic Rotation
This configuration adopts 360 degree hydraulic rotation and requires twin auxiliary services on the excavator. This configuration allows the operator the most maneuverability and increases the overall grab functionality.
